TP-Link Wireless Pan/Tilt Surveillance Camera TL-SC4171G

TP-Link Wireless Pan/Tilt Surveillance Camera TL-SC4171G - Benson Computer
Regular price ₱9,750.00
CAMERA
Image Sensor 1/4" Progressive scan CMOS sensor
Resolution 0.3 Megapixel (640x480)
Lens F: 2.0, f: 4.3mm
Viewing Angle Diagonal 61°, Horizontal 48°, Vertical 36°
Day/Night Mechanism Mechanical IR-Cut filter Removable;
12 Infrared LEDs around the lens(850nm)
IR Working Distance 10-meter (33-feet)
Minimum Illumination 0.5 Lux (0 Lux when IR On)
PTZ
Pan/tilt Range 354° pan/125° tilt range
Pan/tilt Speed Max. 60°/sec pan speed
Max. 80°/sec tilt speed
Digital Zoom 10x Digital
PT Controls Remote manual control, 32 preset positions, 4 patrol tours
VIDEO/IMAGE
Video Compression Motion JPEG; MPEG-4
Frame Rate & Resolutions Max. 30fps @ 640x480, 320x240, 160x120 (MPEG-4)
Max. 15 fps @ 640x480, 320x240, 160x120 (Motion JPEG)
Video Streaming Simultaneous Motion JPEG and MPEG-4 (Dual streaming)
Image Settings Rotation: Mirror, Flip, Mirror Flip
Brightness, contrast, saturation, hue
Overlay capabilities:
time, date, text and privacy image
AUDIO
Audio Communication 2-Way full duplex
Audio I/O Built-in microphone & External input connector
External output connector
Audio Compression G.711 PCM, 8kHz, 64 kbit/s
ALARM AND EVENT MANAGEMENT
Events Trigger Events triggered by motion detection, schedule timer, external alarm input
Notification HTTP, E-mail, FTP and external alarm output
NETWORK
Standards and Protocols Bonjour, TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP,
RTSP, RTP, RTCP, HTTP, HTTPS, TCP, UDP, 3GPP/ISMA RTSP
Security Multiple user access levels with password protection;
HTTPS encryption
WIRELESS
Wireless Data Rates IEEE 802.11 b/g , Up to 54Mbps
Frequency 2.4-2.4835GHz
Wireless Transmit Power <20dBm(EIRP)
Receive Sensitivity 54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Wireless Encryption 64/128-bit WEP, WPA-PSK / WPA2-PSK
INTERFACES
Network Interface RJ-45 for Ethernet 10/100 Base-T
Power Connector DC power jack
Audio Input 3.5 mm jack for Mic/Line in
Audio Output 3.5 mm jack for line out
Alarm Terminal blocks for 1 alarm input, 1 output
Button Reset push button
SURVEILLANCE MANAGEMENT
Users 5 simultaneous unicast users
Unlimited number of users via multicast
Free Management Software Viewing and recording up to 16 cameras
MINIMUM SYSTEM REQUIREMENTS
CPU Pentium4 1.8GHz (or equivalent AMD)
Supported OS Windows 98/ME/2000/2003/XP/Vista/7, Mac OS, Linux
Graphic Card 64MB RAM graphic cards (or equivalent on-board graphic cards)
Memory 512MB RAM
GENERAL
External Power Supply 12V DC, Max 12W
Certification CE, FCC, RoHS
Package Contents Wireless Pan/Tilt Surveillance Camera TL-SC4171G
1 Detachable Omni-directional Antenna
Power Adaptor
RJ-45 Ethernet Cable
Quick Installation Guide
Resource CD
Camera Mount Kit & Pads
Environment Operating Temperature: 0°C~40°C (32°F ~104°F)
Storage Temperature: -40°C ~70°C (-40°F ~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Dimensions( H X W X D ) 112 x 114 (φ)mm (4.4" x 4.4")
  • guarantee & Warranty Authentic & Genuine with manufacturer's warranty

CAMERA
Image Sensor 1/4" Progressive scan CMOS sensor
Resolution 0.3 Megapixel (640x480)
Lens F: 2.0, f: 4.3mm
Viewing Angle Diagonal 61°, Horizontal 48°, Vertical 36°
Day/Night Mechanism Mechanical IR-Cut filter Removable;
12 Infrared LEDs around the lens(850nm)
IR Working Distance 10-meter (33-feet)
Minimum Illumination 0.5 Lux (0 Lux when IR On)
PTZ
Pan/tilt Range 354° pan/125° tilt range
Pan/tilt Speed Max. 60°/sec pan speed
Max. 80°/sec tilt speed
Digital Zoom 10x Digital
PT Controls Remote manual control, 32 preset positions, 4 patrol tours
VIDEO/IMAGE
Video Compression Motion JPEG; MPEG-4
Frame Rate & Resolutions Max. 30fps @ 640x480, 320x240, 160x120 (MPEG-4)
Max. 15 fps @ 640x480, 320x240, 160x120 (Motion JPEG)
Video Streaming Simultaneous Motion JPEG and MPEG-4 (Dual streaming)
Image Settings Rotation: Mirror, Flip, Mirror Flip
Brightness, contrast, saturation, hue
Overlay capabilities:
time, date, text and privacy image
AUDIO
Audio Communication 2-Way full duplex
Audio I/O Built-in microphone & External input connector
External output connector
Audio Compression G.711 PCM, 8kHz, 64 kbit/s
ALARM AND EVENT MANAGEMENT
Events Trigger Events triggered by motion detection, schedule timer, external alarm input
Notification HTTP, E-mail, FTP and external alarm output
NETWORK
Standards and Protocols Bonjour, TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP,
RTSP, RTP, RTCP, HTTP, HTTPS, TCP, UDP, 3GPP/ISMA RTSP
Security Multiple user access levels with password protection;
HTTPS encryption
WIRELESS
Wireless Data Rates IEEE 802.11 b/g , Up to 54Mbps
Frequency 2.4-2.4835GHz
Wireless Transmit Power <20dBm(EIRP)
Receive Sensitivity 54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Wireless Encryption 64/128-bit WEP, WPA-PSK / WPA2-PSK
INTERFACES
Network Interface RJ-45 for Ethernet 10/100 Base-T
Power Connector DC power jack
Audio Input 3.5 mm jack for Mic/Line in
Audio Output 3.5 mm jack for line out
Alarm Terminal blocks for 1 alarm input, 1 output
Button Reset push button
SURVEILLANCE MANAGEMENT
Users 5 simultaneous unicast users
Unlimited number of users via multicast
Free Management Software Viewing and recording up to 16 cameras
MINIMUM SYSTEM REQUIREMENTS
CPU Pentium4 1.8GHz (or equivalent AMD)
Supported OS Windows 98/ME/2000/2003/XP/Vista/7, Mac OS, Linux
Graphic Card 64MB RAM graphic cards (or equivalent on-board graphic cards)
Memory 512MB RAM
GENERAL
External Power Supply 12V DC, Max 12W
Certification CE, FCC, RoHS
Package Contents Wireless Pan/Tilt Surveillance Camera TL-SC4171G
1 Detachable Omni-directional Antenna
Power Adaptor
RJ-45 Ethernet Cable
Quick Installation Guide
Resource CD
Camera Mount Kit & Pads
Environment Operating Temperature: 0°C~40°C (32°F ~104°F)
Storage Temperature: -40°C ~70°C (-40°F ~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Dimensions( H X W X D ) 112 x 114 (φ)mm (4.4" x 4.4")

Warranty Information

Warranty Policy A. Terms and Conditions: 1. The warranty applies only to the products carried or distributed by Benson Computers, that can be identified by the Benson Computers warranty sticker. 2. Items purchased from Benson Computers is fully warranted from date of purchase for a period of twelve (12) months, or depending upon the warranty stated in front, against manufacturing defects, by reason of design, materials or workmanship. 3. Within the warranty period, all defective items are for check-in service only, and are subject for inspection and repair only. The decision for replacement shall be dependent upon the distributor/manufacturer on the defective item(s). Benson Computers will, at its option, repair or replace the defective item(s) at no charge, provided it is returned during the warranty period. Parts for the replacement are warranted for the remainder of the original warranty period. 4. For one (1) year from the date of original purchase, Benson Computers will provide the labor for warranty repair without any service charge at our Service Centers at any of the Benson Computers branches. 5. For provincial clients, if ever an item breaks down, the client has to send us that item, and we'll have it repaired or replaced, depending on the decision of the distributor/manufacturer of the defective item. After the repair or replacement, we will send it back to the client. Benson Computers will not pay any freight charges. The client has to shoulder all the shipping expenses during that back-and-forth transaction. 6. Consumables and/or accessories are not covered by any warranty. (i.e. mouse, mouse pad, ink cartridges, ribbons, toners, diskettes, covers, etc.). 7. The warranty on computer item(s) does not include software or virus problems. Benson Computers is not responsible for loss of program or data stored on hard disk drives. The client/customer is responsible of having their data backed-up before requesting for warranty service. 8. The warranty is void: o If the item(s) has been damaged brought about by accident, misuse, misapplication or any abnormal causes (i.e. animal/insect bites or wastes on parts, use of wrong voltage, damages caused by the use of non-original consumables, damages caused by fire, floods, earthquakes, and other incidental events). o If the warranty seal(s) of the item(s) has been tampered with or altered in any way o If repaired or serviced by others besides us. o If the product serial number has been altered, defaced or removed. 9. There will be no On-site services and lending of backup units. 10. Warranty is valid only for original purchaser only. B. Warranty Limitations: The warranty set forth is exclusive and no other warranty, whether written or oral, is expressed or implied. Benson Computers specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. In no event will the our company or its suppliers be liable to the client for any direct, indirect, special, consequential or incidental damages arising out of the use of any product or documentations like computer hardwares, softwares, accessories, upgrades, etc. including any lost profit or lost savings, or any claim by any party, even if a representative of our company or its suppliers has been advised of the possibility of such damages. Product(s) that has been sent to a third party manufacturing representative through us for service warranty, our company will only serve as a bridge in following up the products and will not be held liable for any delays in releasing the item(s). Our company shall not be liable for any loss or damage of any item(s) that were checked-in or sent in our office, due to floor, fire, eathquake or other abnormal conditions beyond our control. Due to copyright on softwares, we will not be held liable for units seized or confiscated by authorities due to unlicensed sofware. C. Procedure in claiming the warranty: 1. Please attach a photocopy of this warranty agreement together with the defective items 2. Please write your name with the telephone number and the problem of the item(s) on our After Sales Service Receipt (ASSR). 3. Please do not include accessories of the defective items (i.e. power cable, printer cable, etc.) and items that are not purchased from us. 4. Please take note that we will not pay any freight charges. All items should be check-in or sent to the branch you bought the item 5. Any warranty items not claimed within 30 days from date of service will be disposed of by our company in any manner to cover the cost of service.

Delivery

Items purchased can be shipped via a forwarder of your own choice.

Payment Options

Accepts payment via paypal, wire transfer & banks

Login